A plate or other permanent marking that shows the weight of the empty platform and its rated capacity.The capacity of the suspension system that use four or more “legs” must be based on any three of the load bearing legs, and A rigid suspension system that minimizes tipping when personnel move while in the manbasket.Suitable anchorage(s) inside the manbasket for securing personal fall-arrest equipment (full body harness/lanyards),.If metal mesh is used, mesh openings shall not be larger than 1.3 centimeters (0.5 in), All sides of the manbasket shall be enclosed between the top-rail and the toe-board with metal.Guardrail protection consisting of a top-rail approximately 1 meter (42 in) above the platform, a toe-board that extends at least 10 centimeters (4 in) above the platform, and a mid-rail midway between the top-rail and toe-board.An enclosed top that is high enough to allow personnel to stand upright, protect them from overhead hazards, and inhibits them from climbing out,.The capability of supporting its own weight and at least 5 times the maximum intended load,.A grab rail that completely encircles the entire inner perimeter’.Our crane man baskets feature 42-high mesh on the sides, a self-closing swing-in. The first and most crucial safety tip for use of a crane man basket is to ensure the crane being used is stable, certified and prepared to perform the lift, as per OSHA/ASME regulations. An access gate that swings inward and is equipped with a positive latching mechanism, Some vital crane man basket safety tips include: Be Sure It’s Certified.
Any crane suspended manbasket shall incorporate the following minimum features:
